HRD UPS---Global High-end Power Solutions  Expert!

Your best   trustable OEM/ODM  power partner! 

ISO9001-2008,ISO14001 , ISO18001, TLC, CQC, TUV ,CE certified.

Sales & Support
Request A Quote - Email
Select Language
Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
English
French
German
Italian
Russian
Spanish
Portuguese
Dutch
Greek
Korean
Hindi
HomeProductsLithium Iron Battery

12V Lithium Iron Battery High Precision With Discharge Over Current Protection

Good Quality Online High Frequency UPS on sale
Good Quality Online Low Frequency UPS on sale
As an exclusive agent UPS distributor of HRD, We enjoyed wonderful business cooperation with them. Let's grow fast together!

—— Binb Thomas

Perfect UPS, Perfect software(SNMP card), Perfect service, that is HRD UPS!!!

—— Miguel Comlobia

5 years I worked with HRD UPS. April, 2014, I visited HRD UPS factories, I was pleasantly suprised by their design and artwork to ensure quality!!

—— Mr Amani-- Iran

I'm Online Chat Now

12V Lithium Iron Battery High Precision With Discharge Over Current Protection

12V Lithium Iron Battery High Precision With Discharge Over Current Protection supplier 12V Lithium Iron Battery High Precision With Discharge Over Current Protection supplier

Large Image :  12V Lithium Iron Battery High Precision With Discharge Over Current Protection

Product Details:

Place of Origin:CHINA
Brand Name:HRD OR OEM
Certification:CE
Model Number:CPLI-12V*7.5AH

Payment & Shipping Terms:

Minimum Order Quantity:50
Packaging Details:Standard for export
Delivery Time:within 3 -4weeks
Supply Ability:100000PCS/MONTH
Detailed Product Description
Brand: HRD OR OEM Model: CPLI-12V*7.5AH
Certification: CPLI-12V*7.5AH Application: Energy Storage Use.
Feature1: Protection Functions Feature2: Charge/Discharge With Same Port

1 Scope

This product specification only applies to the lithium iron phosphate-base Lithium-ion battery module that supplied by HRD POWER

2 Product & Model

Product:Phosphate-base Lithium-ion Battery Pack with BMS control system.

Model:CPLI-127.5AH

CP – LI – 12 – 7.5AH

Factory code – Cell type – Voltage – Capacity

3 Technical Specification

3.1 Main Functions

(1) Suitable for energy storage use. High efficiency, long life and high reliability;

(2) High precision voltage sample;

(3) Protection functions:

◇ Over and under voltage protection of entire pack and single cell;

◇ Charge and discharge over current protection;

◇ Charge and discharge over or under temperature protection;

◇ Short circuit protection;

(4) Intelligent cell equalization management. Automatically balance each cell through passive balancing method;

(5) Charge/Discharge with same port

3.2 Technical Parameters

Item Parameters Remark
Model CPLI-127.5AH  
Rated Voltage(V) 12  
Typical Capacity(Ah) 7.5 25℃ 1C discharge
Standard Charge Voltage(V) 14.6  
Maximum Charge Current(A) 3.5  
Maximum Discharge Current(A) 5  
Over-charge protection voltage (V) 14.6  
Over-discharge protection voltage (V) 8.4  
Over-charge protection voltage of single cell(V) 3.75  
Over-discharge protection voltage of single cell (V) 2.1  
Over-discharge protection current (A) 15  
Maximum Temperature Protect at Charge(℃) 55  
Minimum Temperature Protect at Charge (℃) 0  
Maximum Temperature Protect at Discharge (℃) 70  
Minimum Temperature Protect at Discharge (℃) -20  
BMS leakage current(mA) ≤1  
Maximum Balanced Current(mA) 20  
Dimensions(mm)

150(width)*95

(height)*65(length)

 
Weight(kg) 1.5 Net weight

4 Drawing

4.1 Aspect and Dimension

 

 

4.2 Interface

Interface descriptions

Name Function Remark
Positive terminal Input and output Input & output in one port
Negative terminal Input and output Input & output in one port

 

5 System Diagram

12V Lithium Iron Battery High Precision With Discharge Over Current Protection

6 Cell Performance Criteria

6.1 Visual Inspection

There shall be no such defect as scratch, flaw, crack, and leakage, which may adversely affect commercial value of the pack.

6.2 Standard Test Condition

The sample should be fresh battery pack that has been manufactured for no more than one month, and cycled less than five times. Unless otherwise specified, all tests stated in this specification are conducted at below condition:

Temperature: 25±5°C;

Humidity: 65±20% RH.

6.3 Test Equipment Accuracy

(1) Precision of dimension meter should be no less than 0.01mm;

(2) Multimeter precision in measuring voltage and current should no less than 0.5 grade and internal resistance should no less than 10kΩ;

(3) The battery internal resistance is determined by the alternation current (a. c.) method (1KhzLCR);

(4) Requirement for the specified Li-ion battery test system: current precision ≤ ± 0.1%, constant voltage precision ≤ ± 0.5%, time precision ≤ ± 0.1%;

(5) Thermometer precision: no less than ± 0.5°C.

6.4 Charge & Discharge

6.4.1 Standard Charge Mode & Parameters

Item Specification Criteria
Standard Continuous Charge Current(A) 0.2C10A 25 ± 5°C, 65 ± 20% RH
Max. Charge Cut-off Voltage(V) 14.6 ± 0.02V standard: 14.6V
Standard Charging Method (CC-CV) In an ambient temperature of 25 ± 5°C, Cell is charged with 0.2C10A to 14.6V, then charged at a constant voltage of 14.6V until its current is less than 0.05C.  
Standard Charge Temperature(°C) 25 ± 5°C  

6.4.2 Standard Discharge Mode & Parameters

Item Test method Criteria
Standard Continuous Discharge Current(A) 0.2C10A 25 ± 5°C, 65 ± 20% RH
Max. Discharge Current(A) C10A  
Discharge Cut-off Voltage(V) 8.4 ± 0.05V standard:8.4V
Standard Discharge Temperature(°C) 25 ± 5°C  

6.5 Electrical Characteristics Test

Item Test method Criteria

0.2C discharge

Performance

1) The ambient temperature for test is 25 ± 2°C.

2) The pack is charged with standard charging method

3) After rest for 30 min at open circuit state, pack is discharged with 0.2C5A to cut-off voltage, and record discharge capacity.

Discharge capacity ≥ 100%*Nominal capacity

0.5C discharge

Performance

1) The ambient temperature for test is 25 ± 2°C.

2) The pack is charged with standard charging method

3) After rest for 30 min at open circuit state, pack is discharged with 0.5C5A to cut-off voltage, and record discharge capacity.

Discharge capacity ≥ 95% * Nominal capacity

1C discharge

performance

1) The ambient temperature for test is 25 ± 2°C.

2) The pack is charged with standard charging method

3) After rest for 30 min at open circuit state, pack is discharged with 1C5A to cut-off voltage, and record discharge capacity.

Discharge capacity ≥ 92% * Nominal capacity

High temperature

discharge performance

1) The pack is charged with standard charging method

2) After stored in an ambient temperature of 55 ± 2°C for 5 h, pack is discharged with 0.2C5A to cut-off voltage; then record discharge capacity.

Discharge capacity ≥ 95%* Nominal capacity

Low temperature

discharge performance

1) The pack is charged with standard charging method

2) After stored in an ambient temperature of -20 ± 2°C for 16 h, pack is discharged with 0.2C5A to cut-off voltage; then record discharge capacity.

Discharge capacity ≥ 60%* Nominal capacity

Capacity retention

and recovery at high

temperature

1) The pack is charged in standard charge method.

2) The pack is stored in an ambient temperature of 55 ± 2°C for 7 days.

3) After stored, pack is to rest for 5 h at 25 ± 5°C.

3) The pack is discharged with 0.2C5A to cut-off voltage; then record the remaining capacity.

4) The pack is charged in standard charge method.

5) The pack is discharged with 0.2C5A to cut-off voltage; then record the recovery capacity.

Capacity retention ≥ 95%* Nominal capacity;

Capacity recovery ≥ 96%* Nominal capacity

6.6 Cycle Life

Item Test method Criteria
Cycle life

1) The ambient temperature for test is 25 ± 5°C.

2) The pack is charged with standard charging method

3) After rest for 30 min at open circuit state, pack is discharged with 0.2C5A to cut-off voltage; then rest for 30 min.

4) Repeat above steps till both of the two continuous cycles discharge capacity are less than 80% nominal capacity; then record the cycle numbers.

Cycle life ≥ 1500 cycles

6.7 Safety

Item Test method Criteria
Constant humidity

1) The pack is fully charged with standard charging method at 25 ± 5°C.

2) The pack is stored in Constant temperature and humidity box at 60 ± 2°C, 90%~95% RH for 12 h.

3) After taking out the pack, it is stored in an ambient temperature of 25 ± 2°C for 2 h.

3) Observe the appearance and sealing of the pack; Discharge with 10I10A to cut-off voltage.

The appearance should be no obvious damage.

No explosion, no smoke, no leakage. And capacity ≥ 90% nominal capacity

Heating test

1) The pack is fully charged with standard charging method at 25 ± 5°C.

2) The pack is stored in the oven, increasing the temperature to 130 ± 2°C at a speed of 5 ± 2°C/min, and then keeping for 30 min.

3) Return the oven temperature to room temperature, and then observe the appearance of the pack.

No fire, no explosion
Vibration test

1) The ambient temperature for test is 25 ±5°C.

2) The pack is fully charged with standard charging method.

3) The pack is fixed on the vibrating table and the vibration of Y, Z and X is carried out. The test parameters are as follows: vibration frequency: 10~55Hz min; vibration time: 90~100 min; sweep rate: 1oct/min; displacement amplitude (single): 0.8mm.

The appearance should be no obvious damage.

No explosion, no smoke, no leakage. And normally work

Impact

1) The ambient temperature for test is 25 ±5°C.

2) The pack is placed on the impact table and is fixed in the fixture. The biggest pack surface should be vertical with the desktop.

4) A 10kg weight hammer is dropped from a height of 1.0m onto the pack.

No fire, no explosion
Overcharge test

1) The ambient temperature for test is 25 ±5°C.

2) The pack is fully charged with standard charging method; then take out the protective unit circuit.

3) The pack is charged with 2C10A to the 2 times of cut-off voltage. The experiment is finished when the pack temperature reaches the steady or falls to the environment temperature.

4) Observed the change of pack in 1 h.

No fire ,no explosion
Overdischarge test

1) The ambient temperature for test is 25 ±5°C.

2) The pack is fully charged with standard charging method; then take out the protective unit circuit.

3) Discharge with 2C10A to 0V of some battery.

4) Observed the change of pack in 1 h.

No fire, no explosion
Short-circuit test

1) The ambient temperature for test is 25 ±5°C.

2) The pack is fully charged with standard charging method; then take out the protective unit circuit.

3) Short circuit the pack by connecting positive and negative terminals with less than 0.1Ω of the total circuit resistance; Finish the experiment when the pack temperature dropped below 10°C of the peak temperature.

No fire, no explosion

7 Capacity

The newly manufactured packs have a capacity of 40%-75% unless the customers claim a special requirement.

8 Storage

Storage time Storage condition
1 week Temperature range: -20℃~50℃; Humidity range: 45%~85%
1 month Temperature range: -20℃~45℃; Humidity range: 45%~85%
6 months Temperature range: -20℃~40℃; Humidity range: 45%~85%

Charge the stored pack every 6 month.

9 Normal Use Condition

The battery pack should be used on these conditions:

(1) Charge operation: temperature: 0℃~45℃, humidity: 45%~85%;

(2) Discharge operation: temperature: -10℃~55℃, humidity: 45%~85%;

(3) The average environment humidity < 80%;

(4) The environment magnetic field strength < 0.5mT;

(5) No flammable and combustible object or gas at working place;

10 Warranty

The warranty period of pack is made according to the contract. However, even though the problem occurs within warranty period, HRD POWER won’t replace a new pack for free as long as the problem is not due to the failure of manufacturing/shipping process or is due to customer’s abuse.

HRD POWER will not be responsible for trouble occurred by the following situations:

(1) AMO will not be responsible for troubles occurred by handling outside of the precautions in instructions;

(2) AMO will be exempt from warrantee any defect when the packs were assembled after acceptance;

(3) AMO will not be responsible for troubles occurred by matching electric circuit, pack and charger.

For safety consideration, the customer is required to contact HRD POWER in advance if the any further operation is needed, especially equipment design, Li-ion battery system circuit protection, high current or other applications or operating conditions and so on.

11 Safety Instructions

In order to avoid damage or personal injury caused by the abuse of square lithium ion battery pack, read the following advice before using a square battery pack.

◇ Do not disassemble, crush, Incinerate, heat and Put into fire for the pack, due to the risk of fire, explosion and burns with the battery.

◇ Keep pack away from children. It is not allowed to remove the battery pack before use, which should be treated in accordance with the local recycling or waste regulations.

◇ If replacing the pack, use produce from the same manufacturer. The produce from other manufacturers may cause the risk of fire and explosion.

◇ Do not immerse the pack in water or wet it.

◇ Do not contact directly the battery positive and negative electrode with the metal shell.

◇ Do not short circuit, over-charge or over-discharge the pack.

◇ Do not use or expose the pack to extreme heat or flame.

◇ Do not reverse the position (+) and negative (-) terminals.

◇ Do not place the pack with the coin, metal jewelry or other things;

◇ Do not destroy and even pierce the pack case or body with nails or other sharp things and not crush the pack with hand, foot or outside strength.

◇ Do not directly solder the pack.

◇ Do not disassemble or modify the pack in any way.

◇ Do not subject the pack to mechanical shock, do not strike or throw pack.

◇ Do not use different types, shape, capacity, brands and kinds pack simultaneity.

◇ Do not contact the battery negative electrode with the shell (positive charge).

◇ If the pack gives off an odor, generates heat, becomes discolored or deformed, or in any way appear abnormal during use, recharging or storage, immediately remove it from the device and stop using it.

◇ If the pack fires, need to use dry powder extinguisher, foam extinguisher or sand to extinguish and away from the environment;

 

Contact Details
Shenzhen HuaRuiDi Science & Technology Co., Ltd.(Shenzhen MOTU Power Supply Co.,Ltd)

Contact Person: Mr. Hunter Chen

Tel:86-755-81737467

Fax:86-755-81737252

Send your inquiry directly to us (0 / 3000)

Other Products

Lithimum-Iron battery UPS 1-3kVA

Automatically Balance Lithium Iron Battery Short Circuit Protection For Energy Storage

12V Lithium Iron Battery High Precision With Discharge Over Current Protection